| |
|
Gypsum
 DIE STONE GREEN
Extremely hard, accurate die material. Recommended for crown and bridge models and dies. One of the original more popular colors, this material has a consistency which allows bowl mixing or spatula mixing on a glass slab. Very
smooth.
Water to Powder
Ratio cc:gr |
Initial Set
in Minutes |
Dry Compression Strength in
PSI |
|
ISO Type |
| 21:100 |
12-14 |
16,000 |
5 |
 COLORBURST® GREEN DIE STONE
A vivid green die stone. A very smooth and accurate die stone. The powder
appears white but bursts with color when mixed with water. Mix until
homogeneous and pour.
Water to Powder
Ratio cc:gr |
Initial Set
in Minutes |
Dry Compression Strength in
PSI |
|
ISO Type |
| 21:100 |
12-14 |
16,000 |
5 |
 RESINOUS DIE STONE
This is a special blend of the best die stone materials combined with soluble resins. The
resulting product provides a creamy mix that flows accurately
into every groove and fossa producing a very tough, smooth die. This stone
is tough, not brittle, which helps reduce chipping when trimming dies. An excellent new die stone. Available in ivory and blue,
ISO Type 4; salmon
and green, ISO Type 5.
Water to Powder
Ratio cc:gr |
Initial Set
in Minutes |
Dry Compression Strength in
PSI |
|
ISO Type |
| 20-21:100 |
12-14 |
16,000 |
ivory & blue = 4
salmon & green = 5
|
 LABORATORY STONE
A fine powdered stone, ideal for all around laboratory use. Excellent working time, low expansion and smoothness assures accurate reproductions. Available in yellow, white or blue.
Water to Powder
Ratio cc:gr |
Initial Set
in Minutes |
Dry Compression Strength in
PSI |
|
ISO Type |
| 30:100 |
8-10 |
8,000 |
3 |
 HIGH STRENGTH DENTAL STONE
A harder, high strength dental stone. Extremely smooth for detailed reproduction of impressions. Very low expansion, ideal for the partial department and orthodontists. Available in yellow and white.
Water to Powder
Ratio cc:gr |
Initial Set
in Minutes |
Dry Compression Strength in
PSI |
|
ISO Type |
| 28:100 |
8-10 |
9,500 |
3 |
 IVORY RESIN XH™
This X-tra Hard ivory colored resin stone was recently introduced as the "Ultimate Die Stone". It combines the tough/smooth properties of our Resin Stones with the surface hardness of the strongest die materials available, without becoming brittle. This premium stone allows minimum expansion for extremely accurate dies. Excellent for precision implant cases and smaller preps, this "all purpose" die stone works well with any impression material--all without the need for hardeners or debubblizers!
Water to Powder
Ratio cc:gr |
Initial Set
in Minutes |
Dry Compression Strength in
PSI |
|
ISO Type |
| 21:100 |
14-15 |
18,000 |
4 |
 OPTIC™Scanning Stone
A new “imaging” die stone that enhances the quality of white light or laser scanning for CAD CAM without the need for disclosure powders or sprays.
A hard and very accurate (Type IV) die stone that can be used for any crown and bridge application. Available in ivory color.
Water to Powder
Ratio cc:gr |
Initial Set
in Minutes |
Dry Compression Strength in
PSI |
|
ISO Type |
| 21:100 |
14-16 |
14,000 |
4 |
FLUID BASE STONE
This extremely dense base stone pours easily from the mixing bowl into any base former without the need for vibration. Ideally suited for full arch base formers, Fluid Base Stone has built in debubblizers and defoamers to pour virtually bubble free. Available in yellow, white and blue.
Water to Powder
Ratio cc:gr |
Initial Set
in Minutes |
Dry Compression Strength in
PSI |
|
ISO Type |
| 23:100 |
8-10 |
12,500 |
3 |
 LABORATORY PLASTER - REGULAR SET
Formulated for general laboratory use, including models, articulating and flasking. A very fine white powder. Low expansion.
Water to Powder
Ratio cc:gr |
Initial Set
in Minutes |
Dry Compression Strength in
PSI |
|
ISO Type |
| 47:100 |
6-8 |
3,600 |
2 |
ORTHODONTIC PLASTER
For orthodontic study models and general laboratory uses. Super white and very smooth. Polishes beautifully and is harder and tougher than regular lab plaster.
Water to Powder
Ratio cc:gr |
Initial Set
in Minutes |
Dry Compression Strength in
PSI |
|
ISO Type |
| 38:100 |
12-14 |
6,500 |
3 |
|
Abrasives
ACRYLUX™
A newer, faster and better abrasive. Works 2-5 times faster than current dental abrasives. Smaller particle size produces a smoother finished surface and assists in improving the "high shine" operation. Improves productivity and efficiency in the polishing process. AcryLux 150 is engineered to replace coarse abrasives. AcryLux 1000 is engineered to replace medium abrasives. Contains NO crystalline silica.
PUMICE
Available in fine, medium and coarse. A very clean, long-lasting pumice for general laboratory use. Will not sour under normal lab conditions. Stacks and holds on work being processed, not weak and runny. Mix 50-50 or one scoop medium and one scoop coarse to obtain a good intermediate pumice for polishing.
ALUMINUM OXIDE
50 or 110 micron. White, washed and triple-magged (run over magnets to remove the finest iron particles). This aluminum oxide is prepared especially for dental use. 15-pound pails or 30-pound bulk. Available in premium or washed and magged.
GLASS BEADS
50 micron. Clean and hard. Screened for consistency. Excellent performance in all types of blasting equipment. Available in 10-pound pails or 25-pound bulk.
|
Alloys
Ceramic Alloys
CERACAST NB: - Beryllium Free SPECS
CERACAST NNB: Nickel and Beryllium Free SPECS
CERACAST V: Non-Precious Dental Casting Ceramic Alloy SPECS
Partial Denture Alloys
PD 2000: Partial Denture Dental Casting Alloy - Chrome/Cobalt SPECS
PD CASTA H: Partial Denture Dental Casting Alloy SPECS
PD CASTA HSH: Partial Denture Dental Casting Alloy SPECS
|
Investment
|
 |
Four Seasons
Oxy-Phosphate, Fine Grained Investment for Chrome-Cobalt Partial Denture Frameworks.
- Water-mix
Instruction |
 |
CB-30 Crown & Bridge Investment
- Oxy-phosphate type
- Carbon-Free
- Suitable for precious or base metal alloys
- No ring necessary
- Freeze-stable liquid
- High expansion liquid available Instruction |
 |
CB-30 Microfire Crown & Bridge Investment
- Oxy-phosphate type
- Rapid burn-out
- Oven entry in 20 minutes as high as 1700 F (927 C)
- Sutable for pressable ceramics
- No ring necessary
- Freeze-stable liquid Instruction |
Flexible Partial |
 |
Flexstar
FlexStar is a resin for flexible partials. It has several advantages over conventional flexible materials.
- Easy to adjust
- Stays flexible
- Natural shades.
Available in pre-packaged cartridges or in a bulk package.
Instruction |
|
|
 |
